Replacing The Brake Release Unit - ABB IRB 2600 Product Manual

4.3.5 Replacing the brake release unit

Location of brake release unit
The brake release unit is located as shown in the figure.
xx0900000101
A
Connectors on push-button unit
The connectors X8, X9 and X10 are placed on the push-button unit as shown in
the figure below.
xx0300000201
Required equipment
Equipment
Standard toolkit
Product manual - IRB 2600
3HAC035504-001 Revision: G
Brake release unit
© Copyright 2009-2015 ABB. All rights reserved.
4.3.5 Replacing the brake release unit
Note
Content is defined in section
page 383.
Continues on next page
4 Repair
Standard tools on
237