3.7 Installing options
3.7.1 Installing the scalable I/O devices
Location
The location of the base unit used as a scalable I/O internal unit is shown in the
following illustration.
xx2300001818
The base unit can also be used as a scalable I/O external unit, with or without
add-on devices.
For more information about installing, configuring, and using the scalable I/O units,
see Application manual - Scalable I/O.
Required parts
Part
Local I/O Digital base [3032-1]
Connectors digital base/add on
Digital add-on [3033-2]
Analog add-on [3034-2]
Connectors I/O Analog
Relay add-on [3035-2]
Connectors I/O Relay
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Article number
3HAC058663-001
3HAC060919-001
3HAC058664-001
3HAC058665-001
3HAC060925-001
3HAC058666-001
3HAC060926-001
Article number
-
-
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.1 Installing the scalable I/O devices
Note
DSQC1030
DSQC1031
DSQC1032
DSQC1033
Note
Content is defined in section
Standard toolkit for controller on
page
426.
Continues on next page
117