4 Repair
4.3.5 Replacing the brake release unit
Continued
7
8
240
Action
WARNING
Before continuing any service work, please
observe the safety information in section
WARNING - The brake release buttons may
be jammed after service work on page
DANGER
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in the section
test run may cause injury or damage! on
page
50.
© Copyright 2009-2015 ABB. All rights reserved.
Note
51!
DANGER - First
Product manual - IRB 2600
3HAC035504-001 Revision: G