Inspecting The Oil Level, Axis 2 Gearbox - ABB IRB 2600 Product Manual

3 Maintenance

3.3.2 Inspecting the oil level, axis 2 gearbox

3.3.2 Inspecting the oil level, axis 2 gearbox
Location of axis 2 gearbox
The axis 2 gearbox is located in the lower arm rotational center, underneath the
motor attachment. The oil plugs are shown in the figure.
xx0800000305
A
B
Required equipment
Equipment
Oil plug sealing washer, gearbox
Lubrication oil
Oil plug (Quick connect fitting)
Standard toolkit
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
Continues on next page
128
Oil plug, filling
Oil plug, draining (Quick connect fitting)
© Copyright 2009-2015 ABB. All rights reserved.
Note
3HAC029646-001
See section Type of lubrication in gearboxes
on page 151.
For article number see Spare part lists on
page 387.
Content is defined in section
on page 383.
These procedures include references to the
tools required.
Product manual - IRB 2600
3HAC035504-001 Revision: G
Standard tools