2
3
Product manual - IRB 2600
3HAC035504-001 Revision: G
Action
Attach the cable harness to the bracket.
Secure the bracket on its attachment screws
in the base.
Tip
Perform this in the following order:
•
Put the attachment screws in the
holes but do not tighten them yet (if
they have been removed earlier).
•
Place the bracket on the attachment
screws.
•
Secure the bracket with its attach-
ment screws.
© Copyright 2009-2015 ABB. All rights reserved.
4.3.2 Refitting the complete cable harness
Note
xx0900000098
Parts:
•
A: Attachment screw and nut
•
B: Bracket
•
C: Cable harness
xx0900000018
Parts:
•
A: Base
•
B: Attachment screws (2 pcs)
•
C: Bracket
Continues on next page
4 Repair
Continued
213