Repair; Introduction - ABB IRB 2600 Product Manual

4 Repair

4.1 Introduction

Structure of this chapter
This chapter describes all repair activities recommended for the IRB 2600 and any
external unit.
It is made up of separate procedures, each describing a specific repair activity.
Each procedure contains all the information required to perform the activity, for
example spare parts numbers, required special tools, and materials.
The procedures are gathered in sections, divided according to the component
location on the IRB 2600.
Required equipment
The details of the equipment required to perform a specific repair activity are listed
in the respective procedures.
The details of equipment are also available in different lists in the chapter
information on page
Safety information
There are general safety information and specific safety information. The specific
safety information describes the danger and safety risks while performing specific
steps in a procedure. Make sure to read through the chapter
before commencing any service work.
If the IRB 2600 is connected to power, always make sure that the IRB 2600 is
connected to earth before starting any repair work.
For more information see:
Product manual - IRB 2600
3HAC035504-001 Revision: G
375.
Note
• Product manual - IRC5
© Copyright 2009-2015 ABB. All rights reserved.
4 Repair
4.1 Introduction
Reference
Safety on page 19
189