Installing Options; Installing The Harness For Double Smb - ABB OmniCore C30 Product Manual

3 Installation and commissioning

3.7.1 Installing the harness for double SMB

3.7 Installing options

3.7.1 Installing the harness for double SMB
Location
The illustration shows the location of the harness double SMB in the controller.
xx1800000037
Required spare parts
Spare part
Harness Single SMB connection
Harness Double SMB connection
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Continues on next page
136
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
3HAC068537-001 Harness single SMB
3HAC067490-001 Harness double SMB
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Product manual - OmniCore C30
570.
3HAC060860-001 Revision: P