ABB IRB 2600 Product Manual page 99

Cooling fan
The details of the cooling fan are shown in the figure below.
xx0900000137
A
B
C
D
Required equipment
Equipment
Cooling fans axes 1 and 2
Locking liquid
Standard toolkit
Circuit diagram
Other tools and procedures
may be required. See refer-
ences to these procedures
in the step-by-step instruc-
tions below.
Product manual - IRB 2600
3HAC035504-001 Revision: G
2.5.1 Installation of cooling fan for motors (option)
Fanbox
Groove in the connector
Back plate
Part of the fanbox that can be removed, if needed. NOTE! Only valid on motor
axis 1!
Art. no.
-
-
-
-
© Copyright 2009-2015 ABB. All rights reserved.
2 Installation and commissioning
Note
For Spare part no. see chapter Spare
parts:
• Spare part lists on page 387
Loctite 243. Used for the three tightening
screws.
Content is defined in section
tools on page 383.
See chapter Circuit diagram on page
These procedures include references to
the tools required.
Continues on next page
Continued
Standard
389.
99