Inspecting labels
Use this procedure to inspect the labels on the robot.
1
2
3
Product manual - IRB 2600
3HAC035504-001 Revision: G
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot work-
ing area.
Check all labels.
Replace any missing or damaged labels.
© Copyright 2009-2015 ABB. All rights reserved.
3 Maintenance
3.3.7 Inspecting information labels
Note
See the figure in
Location of information
labels on page
138.
Continued
139