ABB IRB 2600 Product Manual page 299

D
E
E
F
G
H
Location of axis-3, axis-4, axis-5 and axis-6 motors
The axis-3, axis-4, axis-5 and axis-6 motors are located as shown in the figures.
IRB 2600 Standard.
Motors:
(3) = Axis-3 motor
(4) = Axis-4, axis-5 and axis-6 motors
xx0900000303
A
B
B
C
D
E
F
G
H
Product manual - IRB 2600
3HAC035504-001 Revision: G
Connection box
Axis-1 motor
Axis-2 motor
O-ring
Hole
Cable gland cover
Markings inside armhouse, identifying the position of each motor
Attachment screws, axis-3 motor, (4 pcs) + washers. See
and attachment screws on page 305
Attachment screws, axis-4, axis-5 and axis-6 motors, (3x4 pcs) + washers. See
Tightening torques and attachment screws on page 305
Axis-3 motor
Axis-4 motor
Axis-5 motor
Axis-6 motor
O-ring (axis-4, axis-5 and axis-6)
Armhouse
© Copyright 2009-2015 ABB. All rights reserved.
4 Repair
4.7.2 Refitting motors
Continued
Tightening torques
Continues on next page
299