ABB IRB 2600 Product Manual page 70

2 Installation and commissioning
2.3.1 Lifting robot with roundslings
Continued
9
10
70
Action
When the robot is lifted the roundslings will
adjust themselves.
CAUTION
When lifting, the robot will tilt slightly back-
wards! Be careful not to damage the connec-
tion box at the base of the robot!
Lift the robot with an overhead crane.
© Copyright 2009-2015 ABB. All rights reserved.
Note
xx0800000291
• A: Area where the connection
box can be damaged while lifting.
Lifting capacity:
• See Required equipment on
page 68
Product manual - IRB 2600
3HAC035504-001 Revision: G