Rep 15.2.3 Dadf Front Cover; Rep 15.2.4 Dadf Rear Cover - Xerox WorkCentre 5222 Service Manual

REP 15.2.3 DADF Front Cover

Parts List on PL 15.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Open the Top Cover Assembly.
2. Remove the DADF Front Cover. (Figure
1. Remove the Tapping Screw (1).
2. Remove the tabs (x2) from the Tab Slots and remove the DADF Front Cover.
Figure 1 Removing the DADF Front Cover
Replacement
1. To install, carry out the removal steps in reverse order.
Repairs and Adjustments
REP 15.2.3, REP 15.2.4
WARNING
1)

REP 15.2.4 DADF Rear Cover

Parts List on PL 15.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Open the Top Cover.
2. Open the DADF Document Tray.
3. Remove the DADF Rear Cover.
1. Remove the Tapping Screw (1).
2. Remove the screws (2).
3. Release the hooks (x2).
4. Remove the harness from the notch of the DADF Rear Cover.
5. Remove the tabs (x4) from the Tab Slot and remove the DADF Rear Cover.
February, 2008
4-108
WARNING
(Figure 1)
WorkCentre 5225, 5230
Launch Version