REP 1.2 Front Cover
Parts List on PL 1.1 and PL 1.2
Removal
1.
Switch Off the Printer and disconnect the Power Cord.
2.
Open the Top Cover and Jam Clearance Cover.
3.
Remove the Paper Tray Cover
(Figure
Release the Left Hinge, then the Right Hinge.
Left Hinge
Figure 1 Paper Tray Cover Removal (Front View)
Repairs
REP 1.2
1).
4.
Remove the screws (4)
(Figure
Figure 2 Front Cover Screws
5.
Remove the Front Cover being careful not to damage the Fastening Hooks
a.
Release the Bottom fasteners.
b.
Release the Side fasteners, then the Top fasteners.
Replacement
Install the components in the reverse of removal.
June 2014
4-4
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
2).
Screws
Figure 3 Fastening Hooks
(Figure
3):