Rep 1.0.11 Scanner Assembly; Rep 1.0.13 Dadf Front Cover - Xerox Phaser 8560MFP Service Documentation

REP 1.0.11 Scanner Assembly

Parts List on PL 1.0
Removal
Lock the Scanhead before removing the assembly. A utility for locking the Scanhead is pro-
vided in the Service Tools Menu. Power down the printer with the DADF closed.
1. Remove the DADF (REP 1.0.15).
2. Place the Scanhead in the locked position for removal.
3. Disconnect the Scanner Assembly from the system.
Figure 1 Unlocking the Scanner Assembly Hinges
4. Release the hinge latches using a screwdriver or pen.
5. Slide the Scanner Assembly towards the back, and then lift to remove it from the printer.
Replacement
NOTE: Failure to adequately secure the Scanner cable connection to the Rear Panel can result
in sporadic Scanner errors. Seat the Scanner connector completely using the connector's two
thumbscrews.
Repairs and Adjustments
REP 1.0.11, REP 1.0.13
CAUTION

REP 1.0.13 DADF Front Cover

Parts List on PL 1.0
Removal
1. Open the DADF Front Cover.
2. Remove 3 (plastic, T-20) screws that secure the DADF Front Cover.
Figure 1 DADF Front Cover Fasteners
3. Close and latch the DADF Input Chute.
10/2006
4-8
Initial Issue
Phaser 8510/8560MFP Multifunction Product