Rep 5.30 Dadf Front Scan Read Sensor (4265) - Xerox WorkCentre 4150 Service Manual

REP 5.30 DADF Front Scan Read Sensor (4265)

Parts List on PL 5.59
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Power off the machine. Disconnect the power cord.
2. Remove the DADF from the machine
level surface.
3. Remove the White Bar from the underside of the DADF
Front Scan Read Sensor
Figure 1 Removing the White Bar
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
WARNING
(REP 5.3) and place it upside-down on a clean,
(Figure 1).
1
Lift the White Bar off of the DADF.
4. Remove the Front Scan Read Sensor
1
Remove the mounting screw.
2
Disconnect the connector and remove the
Front Scan Read Sensor.
Figure 2 Removing the Scan Read Sensor
Replacement
1. Reinstallation is the reverse of the Removal procedure.
January 2016
4-93
(Figure 2).
Repairs and Adjustments
REP 5.30