Agilent Technologies E5071C Manual page 1021

Hide thumbs Also See for E5071C:

Table of Contents

1630 FOR I=1 TO Fail_point

1640 PRINT USING "3X,MD.4DE";Fail_data(I)

Assigns a GPIB address to the I/O pass.

Lines 70 to 120

These lines store the sweep center value, sweep span value, trace 1

measurement parameter, trace 2 measurement parameter, trace 1 data

format, and trace 2 data format into the variables Cent, Span, Param1$,

Param2$, Fmt1$, and Fmt2$, respectively.

Stores the number of segments in trace 1 limit table into the Num_of_seg1

Lines 160 to 390

These lines store the settings in trace 1 limit table into the Lim1(*)

Stores the number of segments in trace 2 limit table into the Num_of_seg2

Lines 420 to 590

These lines store the settings in trace 2 limit table into the Lim2(*)

Lines 610 to 620

These lines configure the sweep range for channel 1's sweep range using

the center and span values contained in the Cent and Span values.

Lines 630 to 660

These lines configure channel 1 so that it contains 2 traces, displays

graphs in two windows tiled horizontally (i.e., with the screen split into

upper and lower halves), uses a bus trigger source, and works in

continuous activation mode.

Sets channel 1's active trace to trace 1.

Show Quick Links

Table of Contents