Service And Support; Service And Support Options; Contacting Agilent - Agilent Technologies N5502A Installation Manual

Phase noise measurement system

Table of Contents

Service, Support, and Safety Information

Service and Support

Any adjustment, maintenance, or repair of this product must be performed

by qualified personnel. Contact your Agilent Technologies Service Center

for assistance.

There are no user serviceable parts inside the system. Any servicing instructions

WA R N I N G

are for use by qualified personnel only. To avoid electrical shock, do not perform

any servicing unless you are qualified to do so.

The opening of covers or removal of parts is likely to expose dangerous voltages.

WA R N I N G

Disconnect the product from all voltage sources while it is being opened.

The analyzer's standard warranty is a one- year return to Agilent

Technologies service warranty.

There are many other repair and calibration options available from the Agilent Technologies

N O T E

support organization. These options cover a range of service agreements with varying

response times. Contact Agilent for additional information on available service agreements

for this product.

Assistance with test and measurements needs and information or finding a

local Agilent office are available on the Web at:

http://www.agilent.com/find/assist

You can also purchase accessories or documentation items on the Internet

at:

http://www.agilent.com/find

If you do not have access to the Internet, contact your field engineer.

In any correspondence or telephone conversation, refer to the Agilent product by its model

N O T E

number and full serial number. With this information, the Agilent representative can

determine the warranty status of your unit.

E5505A Installation Guide

Table of Contents