Table of Contents
Advertisement
Return the module for service
Step 3: Install the Software
System Requirements
Item
Operating sys-
tem
Processor
600 MHz or higher required
800 MHz recommended
speed
Available mem-
256 MB minimum,(1 GB or
ory
greater recommended
1.5 GB available hard disk space, includes:
Available disk
1 GB available for Microsoft .NET Framework 3.5 SP1
l
1
space
100 MB for Agilent IO Libraries Suite
l
Super VGA (800x600) 256 col-
Video
ors or more
Microsoft Internet Explorer 6.0
Browser
or higher
1 Note: Because of the installation procedure, less disk space may be required for operation than is required for installation. The amount of space
listed above is required for installation.
2 Note: .NET Framework Runtime Components are installed by default with Windows Vista. Therefore, you may not need this amount of available
disk space.
Item
PXI, or PXIe chassis (in a hybrid slot)
Chassis
PXI System /
A remote PC Host or A PXI or PXI Express embedded controller is required
Host Controller
Embedded
An embedded PC host controller must meet the following requirements:
Controller
Remote
Agilent M9021A PXIe System Interface x8 with one of the following PC interface options:
Controller
Or an equivalent remote controller connected to a PC running one of the above operating systems.
Power up the Controller
If you are using a remote controller, power up the host computer.
If you are using an embedded controller, complete the following steps:
1. Install the embedded controller module into the compatible chassis (Agilent M9018A chassis recommended).
2. Connect peripherals (mouse, keyboard, monitor).
3. Power up the chassis.
10
Windows XP SP3
1 GHz 32-bit (x86), 1 GHz 64-bit
(x64), no support for Itanium64
1 GB minimum
Microsoft Internet Explorer 7.0 or
higher
Module & Chassis Requirements
PXIe System Controller (in PXIe chassis) or PXI System Controller (in PXI chassis)
l
If PXIe Utilize a 2x8, 4x4, 1x8, or 1x4 PXIe System slot link configuration
l
Run one of the above operating systems
l
Agilent M9045A PCIe ExpressCard Adaptor x1, with cable (for laptops)
l
Agilent M9047A PCIe Desktop Adaptor x8, with cable (for desktop PCs)
l
Requirements
Windows Vista® SP1 and SP2,
Windows 7®
(32 or 64-bit), All versions.
2
Support for DirectX 9 graphics with
128 MB graphics memory
recommended (Super VGA
graphics is supported)
M9210A PXI-H 10-bit Digitizing Scope Startup Guide
Linux
kernel 2.6 or higher (32 or 64-bit),
Debian 6.0, CentOS 5
As per the minimum requirements
of the chosen distribution.
As per the minimum requirements
of the chosen distribution.
100 MB
Does not require graphics
(headless system).
X Windows with 1280x1024
recommended for SFP
Distribution supplied browser.
Advertisement
Table of Contents
