Peak Search; Next Peak; Next Pk Right - Agilent Technologies X Series Manual

Complex Spectrum Measurement

Peak Search

Peak Search
Pressing the Peak Search front-panel key places the selected marker on the trace point with the
maximum y-axis value for that marker's trace and opens this Peak Search menu.
Key Path
Mode
Remote Command
Example
Notes
Initial S/W Revision

Next Peak

Moves the selected marker to the next highest local maximum with a value less than the current marker's.
Key Path
Mode
Remote Command
Example
Notes
Initial S/W Revision

Next Pk Right

Moves the selected marker to the nearest peak right of the current marker.
If the selected marker was off, then it is turned on as a normal marker and a peak search is performed.
Key Path
Remote Command
Example
262
Front panel key
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
MAXimum
CALC:SPEC:MARK2:MAX
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
Prior to A.02.00
Peak Search
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
MAXimum:NEXT
CALC:SPEC:MARK:MAX:NEXT
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
Prior to A.02.00
Peak Search
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
MAXimum:RIGHt
CALC:SPEC:MARK2:MAX:RIGH
Selects marker 2 and moves it to the next peak to the right of the current
marker position.