Configuring IES Components
Use the CLI syntax to configure the following entities:
•
Configuring an IES Service on page 511
•
Configuring IES Interface Parameters on page 512
Configuring an IES Service
Use the following CLI syntax to create an IES service:
The following example displays a basic IES service configuration.
A:ALA-48>config>service#
----------------------------------------------
...
ies 1001 customer 1730 create
exit
----------------------------------------------
A:ALA-48>config>service#
7210-SAS M Services Guide
→
Configuring SAP Parameters on page 513
→
Configuring VRRP on page 513
description "to-internet"
no shutdown
Internet Enhanced Services
Page 511