Alcatel-Lucent 7210 SAS M Service Manual page 736

Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Show, Clear, Debug Commands
Page 736
Label
Meters Used
Ingress Stats
Egress Stats
Ingress Drop Stats
Extra-Tag Drop
Stats
Ingress Meter 1
For. InProf
For. OutProf
If Name
Protocols
Oper (v4/v6)
IP Addr/mask
Address Type
Broadcast Address
If Index
Virt. If Index
Last Oper Chg
Global If Index
If Type
SNTP B.Cast
Arp Timeout
IP Oper MTU
LdpSyncTimer
Redirects
Unreachables
TTL Expired
Number of SAP ingress meters in use.
The number of received packets/octets for this SAP.
The number of packets/octets forwarded out of this SAP.
Number of packets/octets dropped by the system.
Number of packets received with the count of VLAN tags exceeding
the count of VLAN tags implied by the SAP encapsulation.
The index of the ingress QoS meter of this SAP.
Number of in-profile packets/octets received on this SAP.
Number of out-of-profile packets/octets received on this SAP.
IP interface name assigned by user.
Protocols enabled for use on this interface.
Operational status of this interface for IPv4 and IPv6.
IPv4 address and Mask assigned to this interface.
Whether the address is a primary or secondary address.
Type of broadcast address used. It can be host-ones or all-ones.
The interface Index assigned by the system. It is used with SNMP IfT-
able.
The interface index assigned by the system. It is used with SNMP.
Timestamp associated with the last operational change.
This is the system wide Interface index allotted by the system.
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
Specifies whether SNTP broadcast client mode is enabled or disabled.
Specifies the timeout for an ARP entry learned on the interface.
The actual largest service frame size (in octets) that can be transmitted
through the port to the far-end router, without requiring the packet to
be fragmented.
Specifies the value used for IGP-LDP synchronization.
Specifies the rate for ICMP redirect messages.
Specifies the rate for ICMP unreachable messages.
Specifies the rate for ICMP TTL messages.
Description
7210-SAS M Services Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents