Alcatel-Lucent 7210 SAS M Service Manual page 931

vc-id — The virtual circuit ID on the SDP ID for which to clear associated FDB entries.
mesh-sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax mesh-sdp sdp-id[:vc-id] ingress-vc-label
Context clear>service>id
This command clears and resets the mesh SDP bindings for the service.
Description
sdp-id — The mesh SDP ID to be reset.
Parameters
vc-id — The virtual circuit ID on the SDP ID to be reset.
spoke-sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax spoke-sdp sdp-id[:vc-id] {all | counters | stp | l2pt}}
Context clear>service>id
This command clears and resets the spoke SDP bindings for the service.
Description
sdp-id — The spoke SDP ID to be reset.
Parameters
vc-id — The virtual circuit ID on the SDP ID to be reset.
all — Clears all queue statistics and STP statistics associated with the SDP.
counters — Clears all queue statistics associated with the SDP.
stp — Clears all STP statistics associated with the SDP.
l2pt — Clears all L2PT statistics associated with the SDP.
7210 SAS M Services Guide
sdp-id[:vc-id]
Values
sdp-id:vc-id
1 — 17407
Values
All VC IDs on the SDP ID.
Default
1 — 4294967295
Values
1 — 17407
Values
1 — 4294967295
Values
1 — 17407
sdp-id
vc-id 1 — 4294967295
sdp-id 1 — 17407
vc-id 1 — 4294967295
VPLS Clear Commands
Page 931