Alcatel-Lucent 7210 SAS M Service Manual page 470

Show Commands
Sample Output
Sample output for PBB Epipe:
*A:7210-SAS>show>service# id 1000 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id
Service Type
Description
Customer Id
Page 470
Label
Endpoint
Acct. Pol
Collect Stats
Ingress qos-pol-
icy
Classifiers Allo-
cated
Classifiers Used
Meters Allocated
Meters Used
Ingress Stats
Egress Stats
B-vpls
Backbone-dest-MAC
Isid
Flood
Oper-dest-MAC
i-Vpls Count
b-Vpls Status
Epipe Count
: 1000
: Epipe
: (Not Specified)
: 1
Displays the endpoint name
Indicates the accounting policy applied to the SAP.
Specifies whether accounting statistics are collected on the SAP.
QoS parameters
The SAP ingress QoS policy ID.
Displays the number of classifiers allocated.
Displays the number of classifiers used.
Displays the number of meters allocated.
Displays the number of meters used.
The number of received packets/octets for this SAP.
The number of packets/octets forwarded out of this SAP.
PBB Tunnel Point parameters
Displays the B-VPLS ID.
Displays the back bone destination MAC address.
Displays the ISID number.
Specifies whether or not the traffic is flooded in the B-VPLS for the
Destination instead of unicast. If the backbone destination MAC is in
theB-VPLS FDB, then it will be unicast.
Displays the operational destination MAC address.
Displays the count of I-VPLS bound to B-VPLS.
Displays the operational state of the B-VPLS service.
Displays the count of Epipe bound to B-VPLS.
Vpn Id
Description
: 0
7210-SAS M Services Guide