Alcatel-Lucent 7210 SAS M Service Manual page 918

Show, Clear, Debug Commands
mfib
Syntax mfib [brief] [ip | mac] brief
mfib [group grp-address]
Context show>service>id
This command displays the multicast FIB on the VPLS service.
Description
brief — Displays a brief output.
Parameters
group grp grp-address — Displays the multicast FIB for a specific multicast group address.
Show Output — The following table describes the command output fields:
Output
Sample Output
A:7210-SAS>show>service>id# mfib
===============================================================================
Multicast FIB, Service 1
===============================================================================
Source Address
-------------------------------------------------------------------------------
*
*
-------------------------------------------------------------------------------
Number of entries: 2
===============================================================================
A:7210-SAS>show>service>id#
Page 918
Label
Group Address
SAP ID
Forwarding/Block-
ing
Number of Entries
Forwarded Packets
Forwarded Octets
Svc ID
Group Address
*
224.1.1.2
IPv4 multicast group address.
Indicates the SAP/SDP to which the corresponding multicast stream
will be forwarded/blocked.
Indicates whether the corresponding multicast stream will be blocked/
forwarded.
Specifies the number of entries in the MFIB.
Indicates the number of multicast packets forwarded for the correspond-
ing source/group.
Indicates the number of octets forwarded for the corresponding source/
group.
Indicates the service to which the corresponding multicast stream will
forwarded/blocked. Local means that the multicast stream will be for-
warded/blocked to a SAP or SDP local to the service.
Sap Id
sap:1/1/1
sap:1/1/1
sap:1/1/2
Description
Svc Id
Local
Local
Local
7210 SAS M Services Guide
Fwd/Blk
Fwd
Fwd
Fwd