Alcatel-Lucent 7210 SAS M Service Manual page 737

authentication
Syntax authentication
Context show>service>id
This command enables the context to display subscriber authentication information.
Description
statistics
Syntax statistics [policy name] [sap sap-id]
Context show>service>id>authentication
This command displays session authentication statistics for this service.
Description
policy name — Specifies the subscriber authentication policy statistics to display.
Parameters
sap sap-id — Specifies the SAP ID statistics to display. See
Sample Output
*A:ALA-1# show service id 11 authentication statistics
===============================================================
Authentication statistics
===============================================================
Interface / SAP
---------------------------------------------------------------
abc-11-90.1.0.254
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#
arp
Syntax arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] [sdp sdp-id:vc-
id] [summary]
Context show>service>id
Displays the ARP table for the IES instance.
Description
ip-address — Displays only ARP entries in the ARP table with the specified IP address.
Parameters
7210-SAS M Services Guide
Label
MAC Address
page 939 for command syntax.
All IP addresses.
Default
Specifies the 48-bit IEEE 802.3 MAC address.
Authentication
Successful
1582
VPRN Show Commands
Description
Common CLI Command Descriptions on
Authentication
Failed
3
Page 737