Alcatel-Lucent 7210 SAS M Service Manual page 422

Virtual Private LAN Services
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>service>vpls>spoke-sdp
config>service>vpls>mesh-sdp
config>service>vpls>sap
This command creates the accounting policy context that can be applied to a SAP.
Description
An accounting policy must be defined before it can be associated with a SAP.
If the policy-id does not exist, an error message is generated.
A maximum of one accounting policy can be associated with a SAP at one time. Accounting policies
are configured in the config>log context.
The no form of this command removes the accounting policy association from the SAP, and the
acccounting policy reverts to the default.
Default accounting policy.
Default
acct-policy-id — Enter the accounting policy-id as configured in the config>log>accounting-policy
Parameters
collect-stats
Syntax [no] collect-stats
Context config>service>vpls>spoke-sdp
config>service>vpls>mesh-sdp
config>service>vpls>sap
This command enables accounting and statistical data collection for either the SAP, network port, or
Description
IP interface. When applying accounting policies the data, by default, is collected in the appropriate
records and written to the designated billing file.
When the no collect-stats command is issued the statistics are still accumulated by the cards.
However, the CPU will not obtain the results and write them to the billing file. If a subsequent
collect-stats command is issued then the counters written to the billing file include all the traffic
while the no collect-stats command was in effect.
no collect-stats
Default
Page 422
4 —2146959
Values
512
Default
context.
1 — 99
Values
7210 SAS M Services Guide