Alcatel-Lucent 7210 SAS M Service Manual page 783

Sample Output
*A:ALA-12# show router 3 interface summary
===============================================================================
Router Summary (Interfaces)
===============================================================================
Instance
-------------------------------------------------------------------------------
1
===============================================================================
*A:ALA-12#
route-table
Syntax route-table [ip-prefix [/mask] [longer] | [protocol protocol] | [summary]]
Context show>router
This command displays the active routes in the routing table.
Description
If no command line arguments are specified, all routes are displayed, sorted by prefix.
ip-prefix[/mask] — Displays routes only matching the specified ip-prefix and optional mask.
Parameters
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
protocol protocol — Displays routes learned from the specified protocol.
summary — Displays a route table summary information.
Standard Show Route Table Output — The following table describes the standard output fields
Output
for the route table.
Sample Output
7210-SAS M Services Guide
Router Name
Base
bgp, isis, local, ospf, rip, static, aggregate
Values
Label
Dest Address
Next Hop
Type
Protocol
Age
Metric
Pref
No. of Routes:
Interfaces
7
The route destination address and mask.
The next hop IP address for the route destination.
Local — The route is a local route.
Remote — The route is a remote route.
The protocol through which the route was learned.
The route age in seconds for the route.
The route metric value for the route.
The route preference value for the route.
The number of routes displayed in the list.
VPRN Show Commands
Admin-Up
7
Description
Oper-Up
5
Page 783