Preface - Alcatel-Lucent 7210 SAS M Service Manual

About This Guide
This guide describes subscriber services, mirroring support provided by the 7210 SAS-M. All the
variants of 7210 SAS-M can be configured in two modes, that is, in network mode and in access-
uplink mode. In network mode configuration, 7210 SAS-M uses IP/MPLS to provide service
transport. In access-uplink mode configuration, 7210 SAS-M uses Ethernet QinQ technology to
provide service transport. The appropriate mode can be selected by configuring the BOF
appropriately.
Note : This user guide is applicable to all 7210 SAS-M platforms, unless specified otherwise.
NOTE: In either mode, it is expected that the user will only configure the required CLI parameters
appropriate for the mode he intends to use. Unless otherwise noted, most of the configuration is
similar in both the Network mode and access uplink mode.
This guide also contains examples to configure and implement various protocols and services.
This document is organized into functional chapters and provides concepts and descriptions of the
implementation flow, as well as Command Line Interface (CLI) syntax and command usage.
Audience
This manual is intended for network administrators who are responsible for configuring the 7210
SAS M. It is assumed that the network administrators have an understanding of networking
principles and configurations. Protocols, standards, and services described in this manual include
the following:
•
•
•
•
7210 SAS M Services Guide
CLI concepts
Subscriber services
Service mirroring
Operation, Administration and Maintenance (OAM) operations

Preface

Page 15