Vprn Debug Commands - Alcatel-Lucent 7210 SAS M Service Manual

Show, Clear, Debug Commands

VPRN Debug Commands

id
Syntax [no] id service-id
Context debug>service
This command debugs commands for a specific service.
Description
The no form of the command disables debugging.
service-id — The ID that uniquely identifies a service.
Parameters
sap
Syntax [no] sap sap-id
Context debug>service>id
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular
Description
SAP.
sap-id — Specifies the physical port identifier portion of the SAP definition. See
Parameters
sap
Syntax [no] sap sap-id
Context debug>service>id
debug>service>stp
This command enables STP debugging for a specific SAP.
Description
The no form of the command disables debugging.
sap-id — Specifies the physical port identifier portion of the SAP definition. See
Parameters
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id
This command enables STP debugging for a specific SDP.
Description
Page 796
Command Descriptions on page 939
Command Descriptions on page 939
for command syntax.
for command syntax.
7210-SAS M Services Guide
Common CLI
Common CLI