Alcatel-Lucent 7210 SAS M Service Manual page 774

Show, Clear, Debug Commands
Show BGP Routes — The following table describes the command output fields for BGP routes.
Output
Page 774
as-number2
well-known-comm no-export, no-export-subconfed, no-advertise
Label
BGP Router ID
AS
Local AS
Network
Nexthop
From
Res. Nexthop
Local Pref.
Flag
Aggregator AS
Aggregator
Atomic Aggr.
MED
Community
Cluster
0 — 4294967295
The local BGP router ID.
The configured autonomous system number.
The configured local AS setting, if not configured it is the same as the
system AS.
The IP prefix and mask length.
The BGP nexthop.
The advertising BGP neighbor's IP address.
The resolved nexthop.
The local preference value.
u — used
s — suppressed
h — history
d — decayed
* — valid
i — igp
e — egp
? — incomplete
> — best
The aggregator AS value.
none — No aggregator AS attributes are present.
The aggregator attribute value.
none — no Aggregator attributes are present.
Atomic — The atomic aggregator flag is set.
Not Atomic — The atomic aggregator flag is not set.
The MED metric value.
none — No MED metric is present.
The BGP community attribute list.
The route reflector cluster list.
Description
7210-SAS M Services Guide