Alcatel-Lucent 7210 SAS M Service Manual page 525

IES Service Configuration Commands
Generic Commands
shutdown
Syntax [no] shutdown
Context config>service>ies
config>service>ies>if
This command administratively disables an entity. When disabled, an entity does not change, reset, or
Description
remove any configuration settings or statistics. The operational state of the entity is disabled as well
as the operational state of any entities contained within. Many objects must be shut down before they
may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command
is entered, the service becomes administratively up and then tries to enter the operationally up state.
Default administrative states for services and service entities is described below in Special Cases.
The no form of this command places the entity into an administratively enabled state.
IES — The default administrative status of an IES service is down. While the service is down, all its
Special Cases
associated virtual router interfaces will be operationally down. The administrative state of the service
is not reflected in the administrative state of the virtual router interface.
For example if: 1) An IES service is operational and an associated interface is shut down.
A service is regarded as operational provided that one IP Interface is operational.
IES IP Interfaces — When the IP interface is shutdown, it enters the administratively and
operationally down states. For a SAP bound to the IP interface, no packets are transmitted out the
SAP and all packets received on the SAP will be dropped while incrementing the packet discard
counter.
description
Syntax description long description-string
no description
Context config>service>ies
This command creates a text description stored in the configuration file for a configuration context.
Description
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of this command removes the string from the configuration.
7210-SAS M Services Guide
2) The IES service is administratively shutdown and brought back up.
3) The interface shutdown will remain in administrative shutdown state.
IES Service Configuration Commands
Page 525