Alcatel-Lucent 7210 SAS M Service Manual page 764

Show, Clear, Debug Commands
neighbor
Syntax neighbor [ip-address [[family family] filter1]]
neighbor [as-number [[family family] filter2]]
Context show>router>bgp
This command displays BGP neighbor information. This command can be entered with or without
Description
any parameters.
When this command is issued without any parameters, information about all BGP peers displays.
When the command is issued with a specific IP address or ASN, information regarding only that
specific peer or peers with the same AS display.
When either received-routes or advertised-routes is specified, then the routes received from or sent
to the specified peer is listed (see second output example).
Note: This information is not available by SNMP.
When either history or suppressed is specified, then the routes learned from those peers that either
have a history or are suppressed (respectively) are listed.
The 'State' field displays the BGP peer's protocol state. In additional to the standard protocol states,
this field can also display the 'Disabled' operational state which indicates the peer is operationally
disabled and must be restarted by the operator.
ip-addr — Displays the BGP neighbor with the specified IP address.
Parameters
family family — Specifies the type of routing information to be distributed by the BGP instance.
filter1 — Specifies route criteria.
filter2 — Specifies route criteria.
Standard and Detailed Neighbor — The following table describes the standard and detailed
Output
command output fields for a BGP neighbor:
Page 764
ipv4, vpn-ipv4
Values
received-routes, advertised-routes, history, suppressed, detail
Values
history, suppressed, detail
Values
Label
Peer
Group
Peer AS
Peer Address
Peer Port
Local AS
The IP address of the configured BGP peer.
The BGP peer group to which this peer is assigned.
The configured or inherited peer AS for the peer group.
The configured address for the BGP peer.
The TCP port number used on the far-end system.
The configured or inherited local AS for the peer group.
Description
7210-SAS M Services Guide