Alcatel-Lucent 7210 SAS M Service Manual page 364

VPLS Services Command Reference
Mesh SDP Commands
Note: Mesh SDP commands are not supported by 7210 SAS-M devices configured in Access uplink
mode.
config
Page 364
— service
— [no] service-id [customer customer-id] [create] [vpn vpn-id] [mvpls] [create] [vpn vpn-
vpls
id] [m-vpls] (for 7210 SAS-M in Network mode)
— [no] service-id [customer customer-id] [create] [vpn vpn-id] [mvpls] service-id [cus-
vpls
tomer customer-id] [create] [vpn vpn-id] [m-vpls] [svc-sap-type {null-star|dot1q-pre-
serve|any}] [customer-vid vlan-id] (for 7210 SAS-M in Access uplink mode)
— mesh-sdp
— no mesh-sdp
sdp-id[:vc-id] [vc-type {ether | vlan}]
sdp-id[:vc-id]
— accounting-policy acct-policy-id
— no accounting-policys
— [no]
collect-stats
— [no]
control-word
— description description-string
— no description
— egress
[egress-vc-label]
— no vc-label
— eth-cfm
mep-id domain md-index association ma-index [direction
— mep
{up}{down}]
— no mep mep-id domain md-index association ma-index
— [no]
—
client-meg-level
— no
—
interval
— no
—
priority
— no
— [no]
— ccm-ltm-priority
— no ccm-ltm-priority
— [no]
— [no]
— bit-error-threshold
— test-pattern
— no
— low-priority-defect
remErrXcon | errXcon | xcon | noXcon}
— mac-address
— no mac-address
— one-way-delay-threshold seconds
— [no]
— [no]
force-vlan-vc-forwarding
— igmp-snooping
— [no]
fast-leave
— import policy-name
— no import
— last-member-query-interval
— no last-member-query-interval
— max-num-groups
ais-enable
[[level [level...]]
client-meg-level
{1 | 60}
interval
priority-value
priority
ccm-enable
priority
description description-string
eth-test-enable
bit-errors
{all-zeros | all-ones} [crc-enable]
test-pattern
{allDef | macRemErrXcon |
mac-address
shutdown
interval
max-num-groups
7210 SAS M Services Guide