Alcatel-Lucent 7210 SAS M Service Manual page 683

vc-id — The virtual circuit identifier.
Values
far-end ip-address — Displays only services matching with the specified far-end IP address.
Default
Show Service SDP Using X — The following table describes show service sdp-using output fields.
Output
Svc ID
Sdp ID
Type
Far End
Oper State
Ingress Label
Egress Label
Sample Output
*A:ALA-7210M# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId
-------------------------------------------------------------------------------
1
2
100
101
-------------------------------------------------------------------------------
Number of SDPs : 4
===============================================================================
*A:ALA-7210M#
7210 SAS M Services Guide
1 — 4294967295
Services with any far-end IP address.
Label
The service identifier.
The SDP identifier.
Type of SDP: spoke
The far end address of the SDP.
The operational state of the service.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by this SDP.
SdpId
300:1
300:2
300:100
300:101
Description
Type Far End Opr State I.Label
Spok 10.0.0.13 Up
Spok 10.0.0.13 Up
Spok 10.0.0.13 Up
Spok 10.0.0.13 Up
Service Commands
E.Label
131071 131071
131070 131070
131069 131069
131068 131068
Page 683