Alcatel-Lucent 7210 SAS M Service Manual page 832

Show, Clear, Debug Commands
Sample Output
*A:ALA-12# show service id 1 labels
==============================================================================
Martini Service Labels
==============================================================================
Svc Id
------------------------------------------------------------------------------
1
1
1
1
1
1
------------------------------------------------------------------------------
Number of Bound SDPs : 6
------------------------------------------------------------------------------
*A:ALA-12#
sap
Syntax sap sap-id [detail]
Context show>service>id
This command displays information for the SAPs associated with the service. If no optional parame-
Description
ters are specified, a summary of all associated SAPs is displayed.
sap-id — The ID that displays SAPs for the service in the form slot/mda/port[.channel]. See Common
Parameters
interface interf ace-name — Displays information for the specified IP interface.
ip-address ip-address — Displays information associated with the specified IP address.
detail — Displays detailed information.
detail — Displays detailed information for the SAP.
Show Service-ID SAP — The following table describes show service SAP fields:
Output
Page 832
Label
I. Lbl
E. Lbl
Sdp Id
10:1
20:1
30:1
40:1
60:1
100:1
CLI Command Descriptions on page 939 for command syntax.
Label
Service Id
SAP
Description (Continued)
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The VC label used by this device to send packets to the far-end device
in this service by the SDP.
Type I.Lbl
Mesh 0
Mesh 0
Mesh 0
Mesh 130081
Mesh 131019
Mesh 0
The service identifier.
The SAP and qtag.
E.Lbl
0
0
0
131061
131016
0
Description
7210 SAS M Services Guide