Alcatel-Lucent 7210 SAS M Service Manual page 597

Global Commands
vprn
Syntax vprn service-id [customer customer-id] [create]
no vprn service-id
Context config>service
This command creates or edits a Virtu9al Private Routed Network (VPRN) service instance.
Description
If the service-id does not exist, a context for the service is created. If the service-id exists, the context
for editing the service is entered.
VPRN services allow the creation of customer-facing IP interfaces in the same routing instance used
for service network core routing connectivity. VPRN services require that the IP addressing scheme
used by the subscriber must be unique between it and other addressing schemes used by the provider
and potentially the entire Internet.
IP interfaces defined within the context of an VPRN service ID must have a SAP created as the access
point to the subscriber network.
When a service is created, the customer keyword and customer-id must be specified and associates
the service with a customer. The customer-id must already exist having been created using the
customer command in the service context. When a service is created with a customer association, it is
not possible to edit the customer association. The service must be deleted and re-created with a new
customer association.
When a service is created, the use of the customer customer-id is optional to navigate into the service
configuration context. If attempting to edit a service with the incorrect customer-id results in an error.
Multiple VPRN services are created to separate customer-owned IP interfaces. More than one VPRN
service can be created for a single customer ID. More than one IP interface can be created within a
single VPRN service ID. All IP interfaces created within an VPRN service ID belongs to the same
customer.
The no form of the command deletes the VPRN service instance with the specified service-id. The
service cannot be deleted until all the IP interfaces and all routing protocol configurations defined
within the service ID have been shutdown and deleted.
None — No VPRN service instances exist until they are explicitly created.
Default
vprn
service-id — The unique service identification number identifying the service in the service domain.
Parameters
vprn customer
customer customer-id — Specifies an existing customer identification number to be associated with
7210 SAS M Services Guide
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every 7210 SAS on which this service is defined.
Values
service-id:
svc-name:
the service. This parameter is required on service creation and optional for service editing or
deleting.
Virtual Private Routed Network Services
1 — 2147483648
64 characters maximum
Page 597