Alcatel-Lucent 7210 SAS M Service Manual page 342

Configuring a VPLS Service with CLI
# UVPLS 201 configs
*A:ALA-B>config>service# vpls 201
*A:ALA-B>config>service>vpls# info
----------------------------------------------
----------------------------------------------
*A:ALA-B>config>service>vpls#
The configuration on ALA-C (7210), the top right node is shown below.
# MVPLS 100 configs
*A:ALA-C# configure service vpls 100
*A:ALA-C>config>service>vpls# info
----------------------------------------------
----------------------------------------------
*A:ALA-C>config>service>vpls#
# UVPLS 101 configs
*A:ALA-C>config>service# vpls 101
*A:ALA-C>config>service>vpls# info
----------------------------------------------
----------------------------------------------
*A:ALA-C>config>service>vpls#
Page 342
description "Default tls description for service id 201"
spoke-sdp 1202:201 create
exit
spoke-sdp 2302:201 create
exit
no shutdown
description "Default tls description for service id 100"
stp
priority 4096
no shutdown
exit
spoke-sdp 1401:100 create
exit
spoke-sdp 2301:100 create
exit
no shutdown
description "Default tls description for service id 101"
spoke-sdp 1401:101 create
exit
spoke-sdp 2301:101 create
exit
no shutdown
7210 SAS M Services Guide