Alcatel-Lucent 7210 SAS M Service Manual page 387

Context config>service>vpls
This command specifies the multicast FIB high watermark. When the percentage filling level of the
Description
multicast FIB exceeds the configured value, a trap is generated and/or a log entry is added.
high-water-mark — Specifies the multicast FIB high watermark as a percentage.
Parameters
mfib-table-low-wmark
Syntax [no] mfib-table-low-wmark low-water-mark
Context config>service>vpls
This command specifies the multicast FIB low watermark. When the percentage filling level of the
Description
Multicast FIB drops below the configured value, the corresponding trap is cleared and/or a log entry
is added.
low-water-mark — Specifies the multicast FIB low watermark as a percentage.
Parameters
mfib-table-size
Syntax mfib-table-size size
no mfib-table-size
Context config>service>vpls
This command specifies the maximum number of (s,g) entries in the multicast forwarding database
Description
(MFIB) for this VPLS instance.
The mfib-table-size parameter specifies the maximum number of multicast database entries for both
learned and static multicast addresses for the VPLS instance. When a table-size limit is set on the
mfib of a service which is lower than the current number of dynamic entries present in the mfib then
the number of entries remains above the limit.
The no form of this command removes the configured maxium MFIB table size.
none
Default
size — The maximum number of (s,g) entries allowed in the Multicast FIB.
Parameters
remote-age
Syntax remote-age seconds
no remote-age
7210 SAS M Services Guide
1 — 100
Values
95%
Default
1 — 100
Values
90%
Default
Virtual Private LAN Services
Page 387