Alcatel-Lucent 7210 SAS M Service Manual page 816

Show, Clear, Debug Commands
Sample Output
*A:Dut-A>show>service>id# all
===============================================================================
Service Detailed Information
===============================================================================
Service Id
Service Type
Description
Page 816
Label
Oper Path MTU
Delivery
Admin State
Oper State
Jitter Buffer
(packets)
Playout Threshold
(packets)
Playout Threshold
(packets)
Peer Pw Bits
Signaling Over-
ride
LLF Admin State
LLF Oper State
Standby Signaling
Master
: 1501
: Epipe
: Default epipe description for service id 1501
Description (Continued)
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to be
fragmented.
Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
The operational state of this SDP.
Indicates the jitter buffer length in number of packet buffers.
Indicates the playout buffer packets threshold in number of packet buf-
fers.
Indicates the current packet depth of the jitter buffer.
Indicates the bits set by the LDP peer when there is a fault on its side of
the pseudowire. LAC failures occur on the SAP that has been configured
on the pipe service, PSN bits are set by SDP-binding failures on the pipe
service. The pwNotForwarding bit is set when none of the above failures
apply, such as an MTU mismatch failure. This value is only applicable if
the peer is using the pseudowire status signalling method to indicate
faults.
pwNotForwarding — Pseudowire not forwarding
lacIngressFault Local — Attachment circuit RX fault
lacEgresssFault Local — Attachment circuit TX fault
psnIngressFault Local — PSN-facing PW RX fault
psnEgressFault Local — PSN-facing PW TX fault
pwFwdingStandby — Pseudowire in standby mode
Indicates the overriding signaled pseudowire type, as configured under
the signaled-vc-type-override option for Apipes. This field is only dis-
played if signaled-vc-type-override is configured.
Displays the Link Loss Forwarding administrative state.
Displays the Link Loss Forwarding operational state.
Indicates if the parameter standby signalling master is enabled.
Vpn Id : 1501
7210 SAS M Services Guide