Alcatel-Lucent 7210 SAS M Service Manual page 848

Show, Clear, Debug Commands
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
R = Residential Split Horizon Group
SAPs Associated : 0
*A:7210-SAS>show>service#
stp
Syntax stp [detail]
Context show>service>id
This command displays information for the spanning tree protocol instance for the service.
Description
detail — Displays detailed information.
Parameters
Show Service-ID STP Output — The following table describes show service-id STP output
Output
fields:
Page 848
access
Label
RSTP Admin State
Core Connectivity
RSTP Oper State
Bridge-id
Hold Time
Bridge fwd delay
Bridge Hello time
Bridge max age
Bridge priority
Topology change
SDPs Associated : 0
Indicates the administrative state of the Rapid Spanning Tree Protocol
instance associated with this service.
Indicates the connectivity status to the core.
Indicates the operational state of the Rapid Spanning Tree Protocol
instance associated with this service. This field is applicable only when
STP is enabled on the router.
Specifies the MAC address used to identify this bridge in the network.
Specifies the interval length during which no more than two Configu-
ration BPDUs shall be transmitted by this bridge.
Specifies how fast a bridge changes its state when moving toward the
forwarding state.
Specifies the amount of time between the transmission of Configura-
tion BPDUs.
Specifies the maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded. This is the
actual value that this bridge is currently using.
Defines the priority of the Spanning Tree Protocol instance associated
with this service.
Specifies whether a topology change is currently in progress.
Description
7210 SAS M Services Guide