Alcatel-Lucent 7210 SAS M Service Manual page 728

Show, Clear, Debug Commands
service-using
Syntax service-using [epipe] [ies] [vpls] [vprn][sdp sdp-id] [customer customer-id]
Context show>service
Displays the services matching certain usage properties.
Description
If no optional parameters are specified, all services defined on the system are displayed.
epipe — Displays matching Epipe services.
Parameters
ies — Displays matching IES instances.
vpls — Displays matching VPLS instances.
vprn — Displays matching VPRN services.
sdp sdp-id — Displays only services bound to the specified SDP ID.
customer customer-id — Displays services only associated with the specified customer ID.
Show Service Service-Using — The following table describes show service service-using output
Output
fields:
Sample Output
*A:ALA-12# show service service-using customer 10
==============================================================================
Services
==============================================================================
ServiceId
------------------------------------------------------------------------------
1
100
Page 728
Services bound to any SDP ID.
Default
1 — 17407
Values
Services associated with an customer.
Default
1 — 2147483647
Values
Label
The service identifier.
Service Id
Specifies the service type configured for the service ID.
Type
The desired state of the service.
Adm
The operating state of the service.
Opr
The ID of the customer who owns this service.
CustomerID
The date and time of the most recent management-initiated change to
Last Mgmt Change
this service.
Type
VPLS
IES
Adm Opr CustomerId
Up Up 10
Up Up 10
Description
Last Mgmt Change
09/05/2006 13:24:15
09/05/2006 13:24:15
7210-SAS M Services Guide