Alcatel-Lucent 7210 SAS M Service Manual page 117

ccm-interval
Syntax ccm-interval {100ms | 1 | 10 | 60 | 600}
no ccm-interval
Context config>eth-cfm>domain>association
This command configures the CCM transmission interval for all MEPs in the association.
Description
The no form of the command reverts the value to the default.
10 seconds
Default
interval — Specifies the interval between CCM transmissions to be used by all MEPs in the MA.
Parameters
remote-mepid
Syntax [no] remote-mepid mep-id
Context config>eth-cfm>domain>association
This command configures the remote maintenance association end point (MEP) identifier.
Description
mep-id — Maintenance association end point identifier of a remote MEP whose information from the
Parameters
slm
Syntax slm
Context config>eth-cfm
This is the container that provides the global configuration parameters for ITU-T Synthetic Loss
Description
Measurement (ETH-SL).
inactivity-timer
Syntax inactivity-timer timer
[no] inactivity-timer
Context config>eth-cfm>slm
The time the responder keeps a test active. The time between packets exceed this values within a test
Description
the responder marks the previous test as complete. The timer treats any new packets from a peer with
the same test-id, source-mac and MEP-ID as a new test responding with the sequence number one.
7210 SAS M Services Guide
1 second, 10 seconds, 60 seconds, 600 seconds, 100 milliseconds
Values
MEP database is to be returned.
1 — 8191
Values
Subscriber Services
Page 117