Alcatel-Lucent 7210 SAS M Service Manual page 756

Show, Clear, Debug Commands
damping
Syntax damping [ip-prefix/mask | ip-address] [detail]
damping [damp-type] [detail]
Context show>router>bgp
This command displays BGP routes with have been dampened due to route flapping. This command
Description
can be entered with or without a route parameter.
When the keyword detail is included, more detailed information displays.
When only the command is entered (without any parameters included except detail), then all
dampened routes are listed.
When a parameter is specified, then the matching route or routes are listed.
When a decayed, history, or suppressed keyword is specified, only those types of dampened routes
are listed.
ip-prefix/mask — Displays damping information for the specified IP prefix and mask length.
Parameters
ip-address — Displays damping entry for the best match route for the specified IP address.
damp-type — Displays damping type for the specified IP address.
decayed — Displays damping entries that are decayed but are not suppressed.
history — Displays damping entries that are withdrawn but have history.
suppressed — Displays damping entries suppressed because of route damping.
detail — Displays detailed information.
Show Damping Output Fields — The following table describes BGP damping output fields:
Output
Page 756
Label
BGP Router ID
AS
Local AS
Network
Flag(s)
Network
From
Reuse time
AS Path
The local BGP router ID.
The configured autonomous system number.
The configured or inherited local AS for the specified peer group. If not
configured, then it is the same value as the AS.
Route IP prefix and mask length for the route.
Legend:
Status codes: u- used, s-suppressed, h-history, d-decayed,
*-valid. If a * is not present, then the status is invalid.
Origin codes: i-IGP, e-EGP, ?-incomplete, >-best
The IP prefix and mask length for the route.
The originator ID path attribute value.
The time when a suppressed route can be used again.
The BGP AS path for the route.
Description
7210-SAS M Services Guide