Alcatel-Lucent 7210 SAS M Service Manual page 905

Link Type
Root Guard
Last BPDU from
Designated Bridge
Fwd Transitions
Cfg BPDUs rcvd
TCN BPDUs rcvd
RST BPDUs rcvd
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:Dut-A>show>service>id#
split-horizon-group
Syntax split-horizon-group [group-name]
Context show>service>id
This command displays service split horizon groups.
Description
stp
Syntax stp [detail]
Context show>service>id
This command displays information for the spanning tree protocol instance for the service.
Description
detail — Displays detailed information.
Parameters
Show Service-ID STP Output — The following table describes show service-id STP output
Output
fields:
7210 SAS M Services Guide
: Pt-pt
: Disabled
: N/A
: N/A
: 0
: 0
: 0
: 0
Label
Bridge-id
Bridge fwd delay
Bridge Hello time
Bridge max age
Bridge priority
Specifies the MAC address used to identify this bridge in the network.
Specifies how fast a bridge changes its state when moving toward the
forwarding state.
Specifies the amount of time between the transmission of Configura-
tion BPDUs.
Specifies the maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded. This is the
actual value that this bridge is currently using.
Defines the priority of the Spanning Tree Protocol instance associated
with this service.
VPLS Show Commands
BPDU Encap : Dot1d
Active Protocol : N/A
Designated Port Id: 0
Bad BPDUs rcvd : 0
Cfg BPDUs tx : 0
TCN BPDUs tx : 0
RST BPDUs tx : 0
Description
Page 905