Common Configuration Tasks - Alcatel-Lucent 7210 SAS M Service Manual

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed to configure a VPRN
service and provides the CLI commands.
1. Associate a VPRN service with a customer ID.
2. Define an autonomous system (optional).
3. Define a route distinguisher (mandatory).
4. Define VRF route-target associations or VRF import/export policies.
5. Create an interface.
6. Define SAP parameters on the interface.
7. Define BGP parameters (optional).
8. Enable the service.
7210 SAS M Services Guide
→ Select node(s) and port(s).
→ Optional - select QoS policies other than the default (configured in
context).
→ Optional - select filter policies (configured in
→ Optional - select accounting policy (configured in
→ BGP must be enabled in the
Virtual Private Routed Network Services
config>filter
config>log
config>router>bgp
config>qos
context).
context).
context.
Page 567