Alcatel-Lucent 7210 SAS M Service Manual page 704

Show, Clear, Debug Commands
id
Syntax id service-id {all | arp | base | sap| interface | mstp-configuration }
Context show>service
This command displays information for a particular service-id.
Description
service-id — The unique service identification number to identify the service in the service domain.
Parameters
all — Display detailed information about the service.
arp — Display ARP entries for the service.
base — Display basic service information.
interface — Display service interfaces.
mstp-confi — guration - Display MSTP information.
sap — Display SAPs associated to the service.
split-horizon-group — Display split horizon group information.
all
Syntax all
Context show>service>id
This command displays detailed information for all aspects of the service.
Description
Show All Service-ID Output — The following table describes the show all service-id command
Output
output fields:
Page 704
Label
Service Detailed Information
Service Id
VPN Id
Service Type
SDP Id
Description
Customer Id
Last Mgmt Change
SAP Count
SDP Bind Count
The service identifier.
The number which identifies the VPN.
Specifies the type of service.
The SDP identifier.
Generic information about the service.
The customer identifier.
The date and time of the most recent management-initiated change to
this customer.
The number of SAPs specified for this service.
The number of SDPs bound to this service.
Description
7210-SAS M Services Guide