Alcatel-Lucent 7210 SAS M Service Manual page 717

detail — Displays detailed IP interface information.
Show Service-ID — The following table describes show service-id output fields.
Output
Sample Output
A:ALA-49# show service id 88 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name
7210-SAS M Services Guide
32 characters maximum
Values
IP interface summary output.
Default
Label
If Name
Type
IP-Address
Adm
Opr
Admin State
Oper State
IP Addr/mask
If Index
If Type
SAP Id
SNTP B.Cast
Arp Timeout
MAC Address
ICMP Mask Reply
Cflowd
Redirects
Unreachables
TTL Expired
The name used to refer to the IES interface.
Specifies the interface type.
Specifies the IP address/IP subnet/broadcast address of the interface.
The administrative state of the interface.
The operational state of the interface.
The administrative state of the interface.
The operational state of the interface.
Specifies the IP address/IP subnet/broadcast address of the interface.
The index corresponding to this IES interface. The primary index is 1;
all IES interfaces are defined in the base virtual router context.
Specifies the interface type.
Specifies the SAP's port ID.
Specifies whether SNTP broadcast client mode is enabled or disabled.
Specifies the timeout for an ARP entry learned on the interface.
Specifies the 48-bit IEEE 802.3 MAC address.
Specifies whether ICMP mask reply is enabled or disabled.
Specifies whether Cflowd collection and analysis on the interface is
enabled or disabled.
Specifies the rate for ICMP redirect messages.
Specifies the rate for ICMP unreachable messages.
Specifies the rate for ICMP TTL messages.
Adm Opr(v4/v6)
IES Show Commands
Description
Type Port/SapId
Page 717