Alcatel-Lucent 7210 SAS M Service Manual page 766

Show, Clear, Debug Commands
Page 766
Label
Last Error
Connect Retry
Local Pref.
Min Route Advt.
Min AS Originate
Multihop
Multipath
Damping
Loop Detect
MED Out
Authentication
Description (Continued)
connectRetry — Connect retry timer expired.
holdTime — Hold time timer expired.
keepAlive — Keepalive timer expired.
recvOpen — Receive an OPEN message.
revKeepalive — Receive an KEEPALIVE message.
recvUpdate — Receive an UPDATE message.
recvNotify — Receive an NOTIFICATION message.
None — No events have occurred.
Displays the last BGP error and sub-code to occur on the BGP neigh-
bor.
The configured or inherited connect retry timer value.
The configured or inherited local preference value.
The minimum amount of time that must pass between route updates for
the same IP prefix.
The minimum amount of time that must pass between updates for a
route originated by the local router.
The maximum number of router hops a BGP connection can traverse.
The configured or inherited multipath value, determining the maxi-
mum number of ECMP routes BGP can advertise to the RTM.
Disabled — BGP neighbor is configured not to dampen route
flaps.
Enabled — BGP neighbor is configured to dampen route flaps.
Ignore — The BGP neighbor is configured to ignore routes with an
AS loop.
Drop — The BGP neighbor is configured to drop the BGP peering if
an AS loop is detected.
Off — AS loop detection is disabled for the neighbor.
The configured or inherited MED value assigned to advertised routes
without a MED attribute.
None — No authentication is configured.
MD5 — MD5 authentication is configured.
7210-SAS M Services Guide