Alcatel-Lucent 7210 SAS M Service Manual page 895

Sample Output
A:Dut-A# show service id 305 labels
===============================================================================
Martini Service Labels
===============================================================================
Svc Id
-------------------------------------------------------------------------------
305
305
305
305
-------------------------------------------------------------------------------
Number of Bound SDPs : 4
===============================================================================
A:Dut-A#
l2pt
Syntax l2pt disabled
l2pt [detail]
Context show>service>id
This command displays Layer 2 Protocol Tunnel (L2-PT) route information associated with this
Description
service.
disabled — Displays only entries with termination disabled. This helps identify configuration errors.
Parameters
detail — Displays detailed information.
Show L2PT Fields — The following table describes show L2PT output fields:
Output
7210 SAS M Services Guide
Label
Type
I. Lbl
E. Lbl
Sdp Binding
1217:305
1317:305
1417:305
1617:305
Label
Service id
L2pt-term enabled
Indicates whether the SDP is spoke.
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The VC label used by this device to send packets to the far-end device
in this service by the SDP.
Type I.Lbl
Spok 130506
Spok 130454
Spok 130428
Spok 131060
Displays the 24 bit (0..16777215) service instance identifier for the
service.
Indicates if L2-PT-termination and/or Bpdu-translation is in use in this
service by at least one SAP or spoke SDP binding. If in use, at least
one of L2PT-termination or Bpdu-translation is enabled.
When enabled it is not possible to enable STP on this service.
VPLS Show Commands
Description
E.Lbl
130516
130591
131015
130843
Description
Page 895