Alcatel-Lucent 7210 SAS M Service Manual page 493

PBB Debug Commands
Id
Syntax id service-id
debug>service
Context
This command debugs commands for a specific service.
Description
service-id — The ID that uniquely identifies a service.
Parameters
event-type
Syntax [no] event-type {config-change | svc-oper-status-change | sap-oper-status-change}
Context debug>service>id
This command enables a particular debugging event type. The no form of the command disables the
Description
event type debugging.
config-change — Debugs configuration change related events.
Parameters
svc-oper-status-change — Debugs service operational status changes.
sap-oper-status-change — Debugs SAP operational status changes.
sap
Syntax [no] sap sap-id
Context debug>service>id
This command enables debugging for a particular SAP.
Description
sap-id — Specifies the SAP ID.
Parameters
stp
Syntax stp
Context debug>service>id
This command enables the context for debugging STP.
Description
7210-SAS M Services Guide
service-id: 1 — 214748364
Values
PBB Show Commands
Page 493